Ceiling Fan Assembly - Emerson LOFT CF765BQ01 Owner's Manual

3.1
CAUTION: The blade assemblies must be mounted
on the motor assembly so that the raised lip edge is
facing up (Figure 1).
Rotate the Motor Hub so the Flat Area exposes the
Two Screw Holes for assembling the Blade.
Install One Blade Assembly on the Top of the Motor
Assembly using Two 1/4-20 x 12mm Pan Head Screws,
two 1/4" Lockwashers and Two 1/4" Flat Washers
(supplied) (Figure 1).
Repeat this procedure for the remaining Two Blade
Assemblies.
Make sure all the 1/4-20 x 12mm Pan Head Screws,
1/4" Lockwashers and 1/4" Flat Washers are tighten
securely to the Blade Assemblies.
NOTE: Take care not to scratch fan housing when
installing blade assemblies.
WARNING
To reduce the risk of personal injury, do not bend the
blade assemblies, balancing the blades or cleaning the
fan. Do not insert foreign objects in between rotating
fan blades.
3.2
Remove the Two Set Screws from the Top of the Motor
Coupler (Figure 2).
Retain the Set Screws for reinstallation in Step 3.7.

3. Ceiling Fan Assembly

1/4-20 x 12mm PAN
HEAD SCREW
1/4" LOCKWASHER
1/4" FLAT WASHER
BLADE
ASSEMBLY
RAISED
LIP EDGE
FLAT AREA OF
MOTOR HUB
MOTOR ASSEMBLY
Figure 1
REMOVE SET SCREW (2)
MOTOR COUPLER
Figure 2
Please contact 1-800-654-3545 for further assistance
5
emersonfans.com
U.L. Model No.: CF765-1