Supervisor Engines - Cisco Catalyst 4500e Series Installation Manual

Supervisor Engines

Table 1-4
Feature
Switching module
support (continued)
1. You will need to configure the 1400 W DC input current as appropriate for the model of switch. Refer to
2. 1000W AC and 1300W AC power supplies will fit and function; however, power management is cautioned and only some
Supervisor Engines
The following supervisor engines are available for the Catalyst 4500 series and Catalyst 4500 E-series
switches:
•
•
•
Catalyst 4500 E-Series Switches Installation Guide
1-16
Features of the Catalyst 4510R-E Switch (continued)
Description
32-port 10/100-Mbps Fast Ethernet plus 2-port 1000BASE-X Layer 3
•
Gigabit Ethernet routing module (WS-X4232-L3)
32-port 10/100-Mbps Fast Ethernet switching module with modular uplink
•
support (WS-X4232-RJ-XX)
–
2-port Gigabit Ethernet switching module (WS-X4302-GB)
•
6-port 1000BASE-X Gigabit Ethernet switching module (WS-X4306-GB)
•
6-port Gigabit Ethernet switching module (WS-X4506-GB-T)
•
18-port Gigabit Ethernet switching module (WS-X4418-GB)
•
• 24- por t 10/ 100/ 1000BA SE- T G i gabi t Et her net sw i t chi ng m odul e
( WS-X4424-GB-RJ45)
48-port Gigabit Ethernet 1000 BASE LX (SPF) switching module
•
(WS-X4448-GB-LX)
• 48- por t 10/ 100/ 1000BA SE- T G i gabi t Et her net sw i t chi ng m odul e
( WS-X4448-GB-RJ45)
24-port IEEE 802.3af-compliant PoE 10/100/1000BASE-T RJ-45 switching
•
module (WS-X4524-GB-RJ45V)
•
48- por t 10/ 100/ 1000BA SE- T G i gabi t Et her net sw i t chi ng m odul e
( WS-X4548-GB-RJ45)
• 48-port Gigabit Ethernet switching module (WS-X4448-GB-SFP)
• 48-port IEEE 802.3af compliant PoE 10/100/1000BASE-T G i gabi t Et her net
sw i t chi ng m odul e ( WS-X4548-GB-RJ45V)
• 6-port 10GbE X2 switching module (WS-X4606-X2-E)
• 48-port 802.3af PoE 10/100/1000 RJ45 switching module
(WS-X4648-RJ45V-E)
48-port Premium PoE 10/100/1000 RJ45 switching module
•
(WS-X4648-RJ45V+E)
"Specifications."
configurations will have adequate power. Please refer to the Cisco Power Calculator at http://tools.cisco.com/cpc/ before
configuring these power supplies.
Supervisor Engine II-Plus (WS-X4013+)
Supervisor Engine II-Plus TS (WS-X4013+TS)
Supervisor Engine II-Plus 10GE (WS-X4013+10GE)
4-port MT-RJ uplink module (WS-U4504-FX-MT) (optional)
(Figure 1-5)
(Figure
Chapter 1
1-6)
(Figure 1-7)
Product Overview
Appendix A,
OL-13972-01