Catalyst 4500 Series Switches; Supervisor Engines - Cisco Catalyst 4500 series Overview

Catalyst 4500 Series Switches

Catalyst 4500 Series Switches

Supervisor Engines

Catalyst 4500 Series Module Installation Guide
1-2
The Catalyst 4500 series switches consist of the Catalyst 4503 switch, the
Catalyst 4506 switch, the Catalyst 4507R switch, and the Catalyst 4510R switch.
The switches are designed for high-performance, high-density wiring closet
applications. A detailed overview of these switches is in the
Installation Guide.
These sections describe the supervisor engines available for the Catalyst 4500
series switches:
Supervisor Engine I (WS-X4012), which is used in the Catalyst 4003 switch
•
(Figure 1-1)
Supervisor Engine II (WS-X4013, which is used in the Catalyst 4006, 4503,
•
and 4506 switches
Supervisor Engine II-Plus (WS-X4013+), which is used in the Catalyst 4006,
•
4503, 4506, and 4507R switches
Supervisor Engine II-Plus TS (WS-X4013+TS), which is used in Catalyst
•
4503 switches only
Supervisor Engine II-Plus 10GE (WS-X4013+10GE), which is used in
•
Catalyst 4503, 4506, and 4507R switches
• Supervisor Engine III (WS-X4014), which is used in the Catalyst 4006, 4503,
and 4506 switches
• Supervisor Engine IV (WS-X4515), which is used in the Catalyst 4006, 4503,
4506, and 4507R switches
Supervisor Engine V (WS-X4516), which is used in the Catalyst 4006, 4503,
•
4506, 4507R, and 4510R switches
Supervisor Engine V-10GE (WS-X4516-10GE), which is used in the
•
Catalyst 4503, 4506, 4507R, and 4510R switches
On the Catalyst 4006, 4503, and 4506 switches, you can install the Supervisor
Engine in slot 1 only. On the Catalyst 4507R or 4510R switch, you install the
primary supervisor engine in slot 1, and you can install an optional redundant
supervisor engine in slot 2.
Chapter 1
(Figure 1-2)
(Figure
(Figure 1-4)
(Figure 1-6)
(Figure 1-7 )
(Figure
Module Overview and Specifications
Catalyst 4500 Series
1-3)
(Figure 1-5)
1-8)
(Figure 1-9)
78-13267-06