Ws-X4648-Rj45V+E - Cisco Catalyst 4500e Series Installation Manual

Switching Modules
Figure D-3
To provide PoE with the 48-port PoE 10/100/1000BASE-T switching module in a Catalyst 4500 E-series
switch, you must have an PoE-enabled power supply. All power supplies support PoE except the 1000 W
and 1400 W AC power supplies.
Auto MDIX is supported on this PoE enabled switching module.
Note

WS-X4648-RJ45V+E

The WS-X4648-RJ45V+E 48-Port Premium PoE 10/100/1000(RJ45) switching module (see
Figure
Specification
Module type
Port duplex mode
Jumbo frame support
Port speed
Number of ports
Connector type
Cable type
Power over Ethernet
Figure D-4
To provide PoE with the 48-port PoE 10/100/1000BASE-T switching module in a Catalyst 4500 E-series
switch, you must have an PoE-enabled power supply. All power supplies support PoE except the 1000 W
and 1400 W AC power supplies.
Auto MDIX is supported on this PoE enabled switching module.
Note
Catalyst 4500 E-Series Switches Installation Guide
D-6
WS-X4548-GB-RJ45V-E 48-Port IEEE-Compliant PoE 10/100/1000BASE-T Switching
Module
D-3) has the following specifications:
Description
10/100/1000BASE-T Fast Ethernet switching module with IEEE802.3af
PoE
Half or full duplex mode
Yes
10, 100, or 1000 Mbps
48
RJ-45
Category 5
15.4 W per powered device on all 48 ports,
software upgradeable to 30W per port
WS-X4548-GB-RJ45V+E 48-Port Premium PoE 10/100/1000BASE-T Switching Module
Appendix D Module Overview and Specifications
OL-13972-01