Cisco Catalyst 4500e Series Installation Manual page 70

Rack-Mounting the Switch
See
Figure 3-1
45 06
Install the chassis in the rack as follows:
Step 2
Insert the rear of the chassis between the mounting posts.
a.
See
mount in the same manner.
Align the mounting holes in the L bracket with the mounting holes in the equipment rack.
b.
Secure the chassis using at least six (three per side) 12-24 x 3/4-inch screws through the elongated
c.
holes in the L bracket and into the threaded holes in the mounting post.
Use a tape measure and level to ensure that the chassis is installed straight and level.
d.
Catalyst 4500 E-Series Switches Installation Guide
3-4
Figure 3-1 for the Catalyst 4506-E switch, the other switches will be very similar.
Attaching the Cable Guide to the Catalyst 4506-E Switch
Figure 3-2 to see how to install a Catalyst 4506-E switch in a rack. Other switches in the series
Chapter 3 Installing the Switch in a Rack
OL-13972-01