Catalyst 4506-E Switch Features - Cisco Catalyst 4500e Series Installation Manual

Chapter 1 Product Overview

Catalyst 4506-E Switch Features

The Catalyst 4506-E switch (see
high-density wiring closet applications.
Figure 1-2
3
2
1
2
The Catalyst 4506-E switch supports the Supervisor Engine II+, Supervisor Engine II+10GE, Supervisor
Engine IV, Supervisor Engine V, Supervisor Engine V-10GE, and Supervisor Engine 6-E. The supervisor
engine has a nonblocking, full-duplex, switching fabric that provides connections between the
supervisor engine and the switching modules. Some supervisor engines use SFP modules for Gigabit
Ethernet connections, or X2 modules for 10-Gigabit Ethernet connections. Refer to the installation note
for your supervisor engine for more details on these modules.
Slot 1 is reserved for the supervisor engine only, which provides switching, local and remote
management, and switch-status monitoring. Slots 2 through 6 are available for switching modules. The
chassis will support up to 24 Gbps per slot for slots 2 through 6, for a maximum of 240 ports and 2
uplinks.
OL-13972-01
Catalyst 4506-E Switch (Front View)
45 06
1
Fan assembly
Switching modules (Slots 2 to 6)
Figure 1-2) is a six-slot switch designed for high-performance
4
3
Supervisor engine (Slot 1)
4
Catalyst 4500 E-Series Switches Installation Guide
Power supplies
Switch Features
1-5