Figure; Required Tools; Removing An Ac-Input Power Supply - Cisco Catalyst 4500e Series Installation Manual

Removing and Replacing the Power Supply

Figure 4-4

Required Tools

You will need a flathead or Phillips screwdriver to perform these procedures.

Removing an AC-Input Power Supply

Follow these steps to remove the AC-input power supply:
Press the power switch on the AC-input power supply down to the off (O) position (see
Step 1
Figure 4-5
Note
Loosen the side-clamp screw on the right side of the power cord plug (see
Step 2
Catalyst 4500 E-Series Switches Installation Guide
4-4
1400 W DC Triple-input Power Supply
Captive screws
Powering Off the Power Switch
Power switch
There are two on/off switches on a 4200 W AC power supply, one for each input.
Chapter 4 Removing and Replacing FRUs
Figure
Figure 4-6).
OL-13972-01
4-5).