Connecting Sources - Christie DS+6K User Manual

Section 2: Installation and Setup
2.3 Connecting
Sources
RGB Signals
2-12
Sources connect to the Input Panel located at the back of the projector. See Figure 2.6.
The upper right corner (
analog RGB source, or it can also be used for YPbPr signals or additional video
sources. Just beside these BNCs, the DVI-I connector (
analog display signals from a computer. Connect analog composite video at
or S-video at from devices such as VCRs, laser disc players or DVD players.
INPUT 4
There are also several optional interfaces available for connecting other sources—
these interfaces slide into the remaining unused option slot, and can be done while the
projector is running.
NOTES: 1) See Section 6 – Specifications for details regarding compatible inputs. 2)
Use high quality shielded cables only for all connections.
consists of five BNCs (connectors) for linking to a variety of sources. The
INPUT 1
typical connection would be to an RGB source such as a PC, Mac, DEC, Sun, SGI and
others. This projector supports multiple sync types with RGB signals: sync-on-green,
composite sync, and separate H & V syncs.
NOTE: Depending on your source, you may need a custom adapter cable with BNC
connectors at the projector end and a different type of connector at the other (such as
a 15-pin "D" connector for some computer sources). Contact your dealer for details.
Connect the BNC input(s) first. Then connect the red, green and blue source
SYNC
outputs to the ,
RED GREEN
sync-on-green, only the red, green, and blue connections are required. If the source
provides a composite sync output, connect it to the
the source provides separate horizontal and vertical sync outputs, connect horizontal
sync to the input labeled
SYNC
labeled See Figure 2.7.
VERT.
) typically accepts an RGB signal from an external
INPUT 1
Figure 2.6. Input Panel
, and BNCs on the
BLUE
and connect vertical sync to
HOR/COMP
) accepts digital or
INPUT 2
panel. If the source uses
INPUT 1
input labeled
SYNC HOR/COMP
SYNC
020-100001-01 Rev. 01 (04/07)
INPUT 3
. If
input