Operation; About The Projector - Christie DS+6K User Manual

Section 3

Operation

This section explains how to effectively operate the projector once it has been
3.1 About the
installed. It is recommended that you read this section and familiarize yourself with
Projector
the components and the available menu options before you begin using your projector
for the first time.
Built-in Keypad
The built-in keypad is located at the back of the projector, beside the input panel. Use
it similarly to the IR remote to control the projector. A status LED display is also
included on this keypad for monitoring projector status.
AC Receptacle
The AC receptacle is located at the back of the projector just below the input panel.
Use this outlet to plug in an appropriately rated line cord. Refer to Section 6 –
Specifications for details.
Adjustable Feet
Located on the underside of the projector are two fully adjustable feet. Raise or lower
these feet when positioning the projector to ensure it is level on all sides so the
displayed image will appear rectangular without any keystone.
NOTE: The third foot, located at the rear of the projector (underside) is not
adjustable.
Refer to Section 2 - Projector Position and Mounting for instructions on how to
adjust the projector's feet.
020-100001-01 Rev. 01 (04/07) 3-1