Christie DS+6K User Manual page 109

Hide thumbs Also See for DS+6K:
Table of Contents

Advertisement

Section 4: Maintenance
4-6
Table 4.2. Lamp/Filter Replacement Kits
Projector Model
Model Number
Mirage S+3K
38-DSP102-x4
Mirage HD3
104-012101-xx
Matrix S+2K
38-DSP102-x6
104-023101-xx
Matrix HD2
DLV1400-DX
38-DSP102-x5
DLV1920-DX
104-017101-xx
38-DSP104-x5
Christie DS+6K
Christie DS+5Kc
38-DSP104-x8
Christie HD6K
104-006101-xx
Christie HD5Kc
104-007101-xx
Christie DW3K/Kc
38-DHD103-x3/-x4
38-DSP104-x6
Mirage S+6K
Mirage HD6
104-013101-xx
Matrix S+5K
38-DSP104-x7
104-016101-xx
Matrix HD4
Christie DS+8K
38-DSP106-x3
Christie HD8K
104-008101-xx
104-018101-xx
Christie HD7Kc
Christie DW6K/Kc
38-DHD106-x3/-x4
38-DSP106-x4
Mirage S+8K
Mirage HD8
104-014101-xx
Matrix HD7
104-024101-xx
A lamp should be replaced when it reaches its end of life or sooner if a noticeable
degradation in brightness occurs (typical in aging lamps). You can set the number of
hours you expect to log with the lamp before replacing it, by setting the Lamp Limit
in the Lamp menu. The LED's next to the built-in keypad will flash "LP" when lamp
time has expired. You can also enable a warning message to appear upon powering up
the projector that will indicate the lamp has reached the limit you set, by entering a
checkmark beside the Lamp Message option.
NOTE: The lamp mode you choose to run the projector in may have an impact on the
number of hours expected for the lamp.
Tools required: #2 Phillips screwdriver
Warnings
A qualified service technician must perform lamp replacement.
Cool the lamp completely and handle by the housing only.
Install the correct wattage lamp supplied by Christie (see above) and read the
Lamp Replacement procedure in its entirety before proceeding.
Do not touch the glass surface of the lamp. Fingerprints left on the surface can
lead to an intense accumulation of heat called a "hotspot", which could
potentially result in the lamp shattering. It is recommended you wear clean, lint-
free gloves and a face shield when working with the lamp.
Lamp Type (Watts)
Lamp/Filter Kit Required
500W
1000W
1200W
020-100001-01 Rev. 01 (04/07)
03-000832-51P
003-120118-01
03-000832-51P
003-120118-01
03-000832-51P
003-120118-01
03-000833-51P
03-000833-51P
003-120117-01
003-120117-01
03-000833-51P
03-000833-51P
003-120117-01
03-000833-51P
003-120117-01
03-000834-51P
003-120116-01
003-120116-01
03-000834-51P
03-000834-51P
003-120116-01
003-120116-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents