Adjusting System Parameters And Advanced Controls - Christie DS+6K User Manual

3.6 Adjusting
System
Parameters and
Advanced
Controls
System Configuration
— GENERAL —
020-100001-01 Rev. 01 (04/07)
Use the Configuration menu to define
general operating parameters and
communications with other projectors
and equipment, and to access other
advanced processing and image
adjustments affecting overall
performance. In addition, the
Configuration menu provides access
to diagnostics, calibration tools and
the Service submenu (password-
protected).
Keep in mind that settings in the Configuration menu (and its submenus) are typically
"global" settings applied regardless of the type of source being used. This
characteristic is identified with the
NOTE: The Configuration menu is recommended for experienced users/technicians
only.
The first six options in the Configuration menu are explained below:
Language
Choose from available languages to use in the projector's menus. The change will
take effect immediately.
Image Orientation
Set the orientation of the image according to the orientation of your projector. If the
setting is incorrect, projected images will be reversed and/or upside down.
Reserved
No function.
Auto Power-up
Enter a checkmark to enable the projector to automatically power up after losing
power due to a power failure or due to unplugging the projector during operation.
Note that unsaved display adjustments may be lost.
Set Date & Time
Enter/read the current year-month-day and hour-minute-second. Changes here reset
the projector's real-time clock.
(globe) icon alongside the option.
Section 3: Operation
3-37.