Listening To The Ham Band; Using Frequency Copy - GRE PSR-295 Owner's Manual

Note: If you press PAUSE while tuning, the scanner stops
tuning and *** PAUSED *** appears. Press PAUSE again,
and the scanner resumes tuning.

Listening to the Ham Band

You can search for transmissions in the scanner's
preprogrammed ham band. The ham band is divided into
six sub-bank.
To search the ham band, simply press HAM. The scan-
ner starts search. You can turn on or off the groups (sub-
bank) by pressing the group numbers. For example, to
turn off group 0, press 0.
If you turn on the sub-bank, the scanner displays search
range about 2 seconds, and start the search at that sub-
bank.
Sub-Bank Frequency Range (MHz)
0 28.000—29.700
1 50.000—54.000
2 144.000—145.9875
3 216.000—225.000
4 430.000—440.000
5 1240.000—1300.000

Using Frequency Copy

You can copy a frequency into a specified channel, a
vacant channel in a specified bank, or a priority channel.
However, you cannot copy a frequency from the Marine
and PMR search bands.
Copying a Frequency into a Specified
Channel
You can copy a frequency into a specified channel when
the scanner stops on that frequency during search mode
or manual tuning.
1. Press FUNC then PGM when you find a frequency.
Store in ChXXX ? (XXX: channel number) appears on
the bottom line. After about 1 second, the frequency
to be copied flashes on the indicator.
Page 25
25
2004/07/06, 15:37