Assigning A Text Tag To A Channel; Text Input Chart - GRE PSR-295 Owner's Manual

Assigning a Text Tag to a Channel

1. Press MANUAL, enter the channel number where you
want to enter the text, then press MANUAL again. MAN
and the bank and channel number appear at the up-
per left corner of the display (for example: MAN
Ch000).
2. Press PGM. MAN changes to PGM.
3. Press TEXT. The cursor appears at the third line.
4. Enter the text using the numeral keys.
Note: If you make a mistake, press /\ or \/ to move to
the character you want to change.
For example, to identify amateur (ham) radio transmis-
sions in the 6 meter range, input "HAM 6m" as follows:
• "H" is the second letter associated with 4 on the key-
pad. Press 4 then 2.
• "A" is the first letter associated with 2 on the keypad.
Press 2 then 1.
• "M" is the first letter associated with 6 on the keypad.
Press 6 then 1.
• "Space". Press •/DELAY.
• "6" is the sixth number associated with 1 on the key-
pad. Press 1 then 6.
• "m" is the first letter associated with 6 on the keypad.
Press 6 and FUNC (for the lower case set), then press
1.
5. Press ENTER to input the text.

Text Input Chart

Press Character
1 0 1 2 3 4 5 6 7 8 9
2 A B C
2 then FUNC a b c
3 D E F
3 then FUNC d e f
4 G H I
4 then FUNC g h i
5 J K L
5 then FUNC j k l
18
Page 18 2004/07/06, 15:37