GRE PSR-295 Owner's Manual page 30

Notes:
• The scanner does not store locked out frequencies
during a search.
• You can lock out as many as 50 frequencies in each
bank. If you try to lock out more, L/O Memory Full!
appears.
• If you lock out all frequencies in one search bank and
only this search bank is activated, All ranges Locked
out! appears and the scanner does not search.
Reviewing Locked-Out Frequencies
To review the frequencies within a search bank that you
locked out:
1. Press SEARCH (if you review in the ham band, press
HAM) to set search mode.
2. Press FUNC then L/OUT. The locked-out frequency
and Lockout list appear. Press /\ or \/ to review the list.
The locked-out number and the total locked-out num-
ber also appear as L/O XX of YY. (The tenth of thirty
locked out numbers would appear as L/O 10 of 30.) If
the search bank has no locked-out frequencies, No
Lockout appears. Press FUNC then L/OUT again to
cancel reviewing locked-out frequencies.
Clearing a Locked-Out Frequency
To clear a locked-out frequency, select that frequency (see
"Reviewing Locked-Out Frequencies"), then press CL.
If all locked-out frequencies are cleared within a bank,
No Lockout appears.
Clearing All Locked-Out Frequencies in
a Search Bank
1. Press SEARCH.
2. Select the search bank in which you want to clear all
locked-out frequencies.
3. Press FUNC then press L/OUT. Lockout list appears.
4. Press FUNC then 6. Clear entire list? Press 1 to clear
all, any other key aborts appears. Press 1 to clear all
locked-out frequencies. No Lockout appears. Press any
key other than 1 to cancel clear.
30
Page 30 2004/07/06, 15:37