GRE PSR-295 Owner's Manual page 11

LIGHT — turns on/off the display's backlight.
PRI (priority) — sets and turns the priority function on or
off.
TEXT — lets you input text.
PAUSE — stops/restarts search/tune.
MODE — changes the receive mode (AM, FM, CTCSS,
DCS)
KEY mark — locks/unlocks the keypad to prevent acci-
dental entries when this key press and hold about three
seconds.
TUNE — lets you input a frequency and allows you to
fine tune a frequency along with /\ or \/.
ATT (attenuate) — turns attenuation on to reduce the
scanner's sensitivity and block extremely strong signals,
or turns it off to increase sensitivity.
/\ or \/ — selects the scan or search direction.
SEARCH — lets you search the six search banks.
L/OUT (lock out) — lets you lock out a selected chan-
nel, skip a specified frequency during search.
PGM — programs frequencies into channels.
ENTER — completes the entry of frequencies and text.
1 — enters a 1, or inputs characters 0 through 9 in text
mode.
2/ABC — enters a 2, or inputs characters A, B, or C.
3/DEF — enters a 3, or inputs characters D, E, or F.
4/GHI — enters a 4, or inputs characters G, H, or I.
5/JKL — enters a 5, or inputs characters J, K, or L.
6/MNO — enters a 6, or inputs characters M. N, or O.
7/PQRS — enters a 7, or inputs characters P , Q, R, or S.
8/TUV — enters an 8, or inputs characters T, U, or V.
9/WXYZ — enters a 9, or inputs characters W, X, Y, or Z.
0 — enters a zero, or inputs characters ., -, #, _, @, +, *,
&, /, ', $, %, !, ^, (, ), ?, ->, `, or <-.
•/DELAY — enters a decimal point (necessary when pro-
gramming frequencies), space, or programs delay time
for the selected channel/search bank.
CL — clears an incorrect entry.
11
Page 11 2004/07/06, 15:37