Using The Delay Function; Locking Out Channels Or Frequencies - GRE PSR-295 Owner's Manual

Using the Delay Function

Many conversations might have a pause of several sec-
onds between a query and a reply. To avoid missing a
reply, you can program a 2-second delay into any of your
scanner's channels. Then, when the scanner stops on
the channel, D appears and the scanner continues to
monitor the channel for 2 seconds after the transmission
stops before it resumes scanning or searching.
Note: Delay is automatically set as the default for each
channel when you turn on the scanner.
To turn delay on or off, press •/DELAY.

Locking Out Channels or Frequencies

You can scan existing channels or search frequencies
faster by locking out channels or frequencies that have a
continuous transmission.
Locking Out Channels
To lock out a channel while scanning, press L/OUT when
the scanner stops on the channel. To lock out a channel
manually, select the channel then press L/OUT so L ap-
pears.
Note: You can still manually select locked-out channels.
To remove the lockout from a channel, manually select
the channel and press L/OUT so L disappears.
Reviewing the Lock-Out Channels
To review all locked out channels, press MANUAL. Then
repeatedly alternate between pressing FUNC and then
L/OUT to view each locked-out channel. When you finish
reviewing locked-out channels, press MANUAL.
Locking Out Frequencies
To lock out a frequency during a search, press L/OUT
when the scanner stops on that frequency. The scanner
locks out the frequency, then continues searching.
Page 29
29
2004/07/06, 15:37