Notes Setup; Sequencer Features; Parameter Locks - Elektron Analog Four Full Reference Manual

THE SEQUENCER
µTM controls the micro timing offset. A negative value will nudge the trig to a position before
the quantized sequencer step, a positive after. Each micro timing value step is equal to one 1/
384th of a 1/16 sequencer step. When entering note trigs in the LIVE RECORDING mode,
they will automatically be micro timed. Read more about this recording mode on page 21.
ENV controls whether the ENVF should be retrigged or not when a note trig or trigless lock is
activated by the sequencer.
ENV controls whether the ENV2 should be retrigged or not when a note trig or trigless lock is
activated by the sequencer.
LFO controls whether the LFO1 should be retrigged or not when a note trig or trigless lock is
activated by the sequencer.
LFO controls whether the LFO2 should be retrigged or not when a note trig or trigless lock is
activated by the sequencer.

NOTES SETUP

In the NOTES SETUP menu, more setting relating to notes of the active track are found. Access the menu by
pressing [FUNCTION] + [NOTE]. Navigate in the menu using the [UP]/[DOWN] arrow keys or the LEVEL knob.
Change settings with the [LEFT]/[RIGHT] arrow keys.
GLOBAL QUANTIZE will affect all micro timed trigs of all tracks. The higher the quantize
value, the more all micro timed trigs will be quantized.
TRK QUANTIZE will affect all micro timed trigs of the active track. The higher the quantize
value, the more all micro timed trigs will be quantized.
TRK KEY SCALE sets the key scale of the track. All notes on the sequencer track will be
auto-adjusted to the selected scale. The setting is non-destructive, meaning if the setting is
changed from for example MIN to OFF, the notes will start playing according to their original
note values. This setting also affects how the track will be transposed when performing a
transpose function. If for example MAJ is set, all notes of the track will be transposed accord-
ing to a major scale. Read more about the transpose functionality on page 27.
TRK KEY NOTE sets the key note of the track. This setting affects how the track will be trans-
posed when performing a transpose function. The transpose will be an offset from the key
note.
TRK TRANSPOSABLE will when activated make the track transposable. If deactivated, the
track can not be transposed, which can be a relevant setting for tracks containing drum
sounds. A quick command for this setting exists. Press [TRANSPOSE] + [TRACK] to acti-
vate/deactivate the transpose functionality for a track. Read more about track transpose on
page 27.

SEQUENCER FEATURES

PARAMETER LOCKS

Parameter locks is a powerful feature that allows trigs to have their own unique parameter values. The note trigs
of a synth track could for example have different pitch or filter settings. All parameters found in the PARAMETER
pages and the ARP and NOTE menus are possible to parameter lock and parameter locks can be applied to all
24