Elektron Analog Four Full Reference Manual page 22

KITS AND SOUNDS
PERFORMANCE CONFIGURE is where parameters are assigned to the performance mac-
ros. After selecting this option, the list of performance macros and the knobs they are
assigned to will show up.
Use the [UP] and [DOWN] arrow keys to select the DATA ENTRY knob corresponding to the
performance macro that should be edited. Press [YES/SAVE] to confirm the selection. The
menu where track parameters are assigned to the selected performance macro will appear.
Up to five track parameters can be assigned to a performance macro. Parameters can be
derived from all six tracks. Select from which tracks parameters should be assigned by click-
pressing DATA ENTRY knobs A-E. Select the track parameters that should be assigned by
turning DATA ENTRY knobs A-E. DATA ENTRY knobs F-J are used to set the depth of the
five track parameters. The depth is an offset to the original track parameter value.
By default the parameter macro knob span a parameter value range of 0-127. A parameter
macro value of 0 will not introduce any changes to the sound. Press the LEVEL knob to make
the performance macro knob work in a bipolar fashion, meaning the parameter macro value
range will go from -64 to +63.
While a pattern or Sound is playing, turn the LEVEL knob to preview how the performance
macro affects the sound.
•
PERFORMANCE mode parameters are note possible to parameter lock.
•
If for example the depth of the OSC1 PITCH of track 1 is set to 63 and the parameter macro is set
to a non-bipolar mode, turning the parameter macro knob to 127 will introduce a parameter value
offset of +63 to the OSC1 PITCH parameter. If the macro knob is set to a bipolar mode, turning the
parameter macro value to +63 will introduce a parameter value offset of +63 to the OSC1 PITCH
parameter. Conversely, turning the parameter macro knob to -64 will introduce a parameter value
offset of -64 to the OSC1 PITCH parameter.
•
Use parameter macros to affect the most relevant parameters when playing live. By carefully set-
ting up parameter macros you might find that you don't have to leave this mode at all during your
live set.
PERFORMANCE RENAME allows performance macro knobs to be named. Use the [UP] and [DOWN] arrow
keys to select the DATA ENTRY knob corresponding to the performance macro that should be named. Press
[YES/SAVE] to confirm the selection. The NAMING menu will appear.
14