Performance Mode; Performance Setup - Elektron Analog Four Full Reference Manual

KITS AND SOUNDS
quickly scroll between the menu pages. Once a kit has been selected, press [YES/SAVE] to load it. The loaded
kit will be linked to the active pattern.
SAVE KIT is where all the current, kit related, settings can be saved as a kit. The saved kit will be linked to the
active pattern.
When this menu is opened the kit list will appear. Select the slot to which the kit should be saved by using the
[ARROW] keys or the LEVEL knob. Press [YES/SAVE] to save to the selected slot. The NAMING menu, cov-
ered on page 10, will appear.
CLEAR KIT will clear the content of the currently loaded kit, basically initializing it. When selecting this option a
prompt will appear. Press [YES/SAVE] to clear the kit or [NO/RELOAD] to cancel the operation. Note that no kit
information will be permanently lost until the kit is saved to the same kit slot it was loaded from.
•
Copy, clear and paste operations are available in the LOAD KIT, SAVE KIT and PERFORMANCE
SETUP menus.
•
Press and turn the LEVEL knob to increase scrolling speed in the LOAD KIT and SAVE KIT menus.
•
Once you have assembled a kit you like, you should preferably save it.

PERFORMANCE MODE

The PERFORMANCE mode makes it possible to control several track parameters, which can be derived from
any track, at once by turning a single DATA ENTRY knob. PERFORMANCE mode settings are saved as a part
of a kit. Access the mode by pressing the [PERFORMANCE] key.
The ten available performance macros are seen in the PERFORMANCE menu. Turn the DATA ENTRY knobs to
adjust the parameter macro settings.

PERFORMANCE SETUP

The ten performance macros available in the PERFORMANCE mode are set up in the PERFORMANCE
SETUP menu. Access this menu by pressing [FUNCTION] + [PERFORMANCE].
13