How To Assemble 2.5" Hdd In Removable Rack - Datavideo HDR-45 Quick Start Manual

How to Assemble the 2.5" HDD in a Removable Rack
1. Remove the screws from the back cover of the enclosure and pull out the PCB board.
NOTE: DO NOT REMOVE THE SCREWS ON THE FRONT COVER.
2. Place the 2.5" hard drive on the PCB board and slide the drive towards the rear SATA
connectors on the board. Turn the PCB over and secure it with four Philips screws (included).
3. Slide the PCB board into the enclosure with the SATA connectors facing outward.
4. Close the back cover and secure it with the two Philips screws (black).
5. Push the hard drive enclosure into the hard drive slot of the recorder and turn the latch to the left
(locked position).