How To Mount 2.5" Hard Drive Into Removable Caddy - Datavideo DN-600 Quick Start Manual

How to mount 2.5" hard drive into removable caddy.

N.B Hard Drive Support.
At the time of writing this manual the largest capacity HDD tested with the DN-600 is the
WD3200BEVT Western Digital 320GB.
For up to date information about HDD compatibility contact your local Datavideo Office
If your DN-600 does not come with a hard drive pre-fitted in the caddy please follow these
instructions to fit your own drive. Always check compatibility before buying hard drive.
1. Remove two screws from the 2.5" removable HDD rack rear cover then pull out the PCB
2. Assemble four screws to fasten 2.5" HDD on PCB
3. Push PCB into the HDD rack
4. Assemble two screws to fasten HD rack rear cover
5. Lock caddy into DN-600 by pushing lever to left.
- 7 -