Specifications - Datavideo HDR-45 Quick Start Manual

Specifications

Inputs Interface
Outputs Interface
Record format
Other Interface
Video Input
HD SDI signal
SD SDI signal
Audio
Operating Temperature
Humidity
Dimension & Weight
Power
• 1x BNC connector for HD/SD-SDI input
• 2x XLR connector for audio input
• 1x BNC connector for HD/SD-SDI pass through output
• 1x BNC connector for SDI output
• 1x HDMI connector for HDMI output (1.1)
• Video：MPEG2 (.M2T)
• Audio：MPEG1 Layer2
• Audio Bit rate：384Kbps
• Audio Resolution：16bit
• 1x Mini XLR connector for GPI remote control
• 1x D-Sub(9 Pin) for RS-422 or RS-232 either one
• 1x IEEE-1394 Port for connection to PC, MAC and
• 1x Phone plugs for audio monitor output
• HD (1080i/50 - 1080/59.94i – 720p/50 – 720/59.94p)
• SD (480/59.94i, 576/50i)
SMPTE 292 standard complied with
• Output return loss : More than 15 dB (5MHz to 750MHz)
More than 10 dB (750MHz to 1.5 GHz)
• Output level : 0.8 Vpp ± 10%
• Rise time : Less than 270 ps
• Fall time : Less than 270 ps
• Difference between rise time and fall time within 100 ps
• Alignment jitter : Less than 0.2 UI
• Timing jitter : Less than 1.0 UI
• Eye aperture ratio : More than 90%
• DC offset : 0 ± 0.5V
• Equalizer use 5C-FB cable support 100 meters
SMPTE 259M standard complied with
• Output return loss : More than 15dB(5MHz to 270MHz)
• Output level : 0.8Vpp ± 10%
• Rise time : less than 1.5ns
• Fall time : less than 1.5ns
• Difference between rise time and fall time less than 0.5ns
• Jitter less than : 0.2 UI
• Bandwidth 20~20KHz < +/- 3dB
• S/N Ratio > 70 dB
• THD. < 0.1%
• 0°C to 40°C (32°F to 102°F)
• 10% to 90% (non condensing)
• 211mm (W) x 280mm (D) x 97mm (H) / 3Kgs
• Input AC 100 ~ 240V Switching Adaptor, Output DC 12V / 3A
37
HDV device.