Playing A Track - Datavideo HDR-45 Quick Start Manual

Playing a Track

It is playback M2T tracks to analogue monitors or recorders via the HDMI video outputs.
Use the Previous (▲) / Next (▲) Button(right)s to select the track you want to play, and then press the Play (►II)
Button.
It is also possible to set the HDR-45 to loop play. In loop play the track will looped until stopped.
To set up loop play press the Menu Button to enter menu mode and then the FWD (►►) Button until SETUP
LOOP PLAY is displayed.
+
Press the Next (▲) Button(right) to enter the setup loop play menu, and then press the FWD (►►) Button to
select ENABLE
Press the Next (▲) Button(right) to select SET and then press the Menu Button to return to track display.
When you press play the selected track will start playing, and will loop until the Stop (■) Button is pressed.
To cancel loop playback, follow the above procedure but select disable instead of enable.
20