Print Settings - Lexmark X925 User Manual

Menu item
Negative Image
Off
On
Shadow Detail
-4 to 4
ADF Skew Fix
Off
On
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
-4 to 4

Print Settings

Copies
1–999
Paper Source
Tray [x]
Manual Paper
MP Feeder
Manual Envelope
Color
Color
Black Only
Collate
On (1,2,1,2,1,2)
Off (1,1,1,2,2,2)
Sides (Duplex)
1 sided
2 sided
Duplex Binding
Long Edge
Short Edge
Description
Creates a negative image of the original document
Note: Off is the factory default setting.
Adjusts the amount of shadow detail visible on a scanned image
Note: 0 is the factory default setting.
Corrects slight skew in the scanned image
Note: Off is the factory default setting
Specifies whether the original document is scanned edge-to-edge
Note: Off is the factory default setting.
Adjusts the amount of sharpness on a scanned image
Note: 3 is the factory default setting.
Enables the user to specify "warm" or "cool" outputs. "Cool" values generate a bluer
output than the default while "warm" values generate a redder output than the
default.
Specifies a default number of copies for each print job
Note: 1 is the factory default setting.
Sets a default paper source for all print jobs
Note: Tray 1 is the factory default setting.
Generates color print jobs output
Note: Color is the factory default setting.
Stacks the pages of a print job in sequence when printing multiple copies
Note: On is the factory default setting.
Specifies whether prints are on one side or on both sides of the page
Note: 1 sided is the factory default setting.
Defines the way duplexed pages are bound and how the printing on the back of the page
is oriented in relation to the printing on the front of the page
Notes:
•
Long edge assumes binding along the long edge of the page (left edge for portrait
and top edge for landscape).
•
Short edge assumes binding along the short edge of the page (top edge for portrait
and left edge for landscape).
Understanding printer menus
201