A Network Destination Stopped Working Or Is Invalid - Lexmark X925 User Manual

M
AKE SURE THE FILENAME YOU WANT TO SCAN TO IS NOT ALREADY IN USE
Verify that the file to which you want to scan is not open by another application or user.
To help prevent errors, make sure either Append time stamp or Overwrite existing file is selected in the
destination configuration settings.
A
DJUST THE SCAN SETTINGS
In the destination configuration settings, lower the scan settings. For example, lower the scan resolution, disable
Color, or change the Content type to Text.
C
ONTACT CUSTOMER SUPPORT
If you still cannot isolate the problem, then contact customer support for additional help.

A network destination stopped working or is invalid

M
AKE SURE THE PRINTER AUTHENTICATION IS CONFIGURED
If the application is configured to use MFP authentication credentials, then the printer authentication settings
must be configured from the Embedded Web Server.
For more information on configuring the printer authentication settings, see the Embedded Web Server
Administrator's Guide available on www.lexmark.com.
M
AKE SURE DESTINATION HAS A VALID NETWORK ADDRESS
If the destination has been moved, then the network address may have changed. The destination network address
can be accessed from the Embedded Web Server.
M
AKE SURE THE PRINTER IS CONNECTED TO THE NETWORK
Make sure that all appropriate network cables are securely connected and that the network settings of the printer
are correctly configured. For information on networking the printer, see the Networking Guide on the Software and
Documentation CD that came with the printer.
C
HECK THE SYSTEM LOG FOR RELEVANT DETAILS
1
Type the printer IP address or hostname in the address field of your Web browser.
If you do not know the IP address of the printer, then you can:
•
View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
•
Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.
2
Click Settings > Solutions > Embedded Solutions > System tab > Log.
Troubleshooting
280