Toner Rubs Off; Toner Specks; Transparency Print Quality Is Poor; Uneven Print Density - Lexmark X925 User Manual

Toner rubs off

Cause
Specialty media is being used.
The Paper Weight setting in the Paper Menu is wrong for
the type of paper being used.
Fuser is worn or defective.
Fuser is in envelope mode.

Toner specks

Cause
Toner cartridges may be worn or defective.
Toner is in the paper path.
The imaging unit may be defective.

Transparency print quality is poor

Try one or more of the following:
C
HECK THE TRANSPARENCIES
Use only transparencies that meet the printer specifications.
C
HECK THE PAPER TYPE SETTING
Make sure the paper type setting is set to Transparency:
1
From the printer control panel Paper menu, check the Paper Type setting.
2
Before sending the job to print, specify the correct type setting:
•
For Windows users, specify the type from Print Properties.
•
For Macintosh users, specify the type from the Print dialog.

Uneven print density

ABCDE
ABCDE
ABCDE
Solution
Make sure the correct Paper Type is selected.
Change the Paper Weight from Normal to Heavy. If
necessary, change Paper Texture from Normal to Rough.
Replace the fuser.
Open the side door. Make sure that the green lever on the
left side of the fuser is not in envelope mode.
Solution
Replace the defective or worn cartridges.
Call for service.
Replace the defective imaging unit.
Troubleshooting
297