Heat Discharging Fan - Canon LBP-2000 Service Manual

CHAPTER 3
5. Removing the right cover
1) Remove the upper cover.
2) Slide out the front cover slightly.
3) Remove the screw [1], and detach the
right cover [2].
[2]
Figure 3-1-12
6. Removing the rear cover
1) Remove the upper cover, left cover, and
right cover.
2) Remove the 9 screws [1], and detach the
rear cover [2].
[1]
[1]
[2]
Figure 3-1-13
3 - 4
[1]
[1]
[1]
B. Heat Discharging Fan
1. Removing the heat discharging fan
1) Remove the video controller PCB. (See II-
B-1 'Removing the Video Controller PCB
unit.')
2) Disconnect the connector J109 [1] from
the DC controller PCB, and free the har-
ness from the harness guide.
Figure 3-1-14
3) Remove the 2 screws [2], and detach the

heat discharging fan [3].

[3]
[2]
Figure 3-1-15
[1]