Canon LBP-2000 Service Manual page 146

CHAPTER 3
1) Remove the paper feeder pickup assem-
bly. (See VIII-C-1 'Removing the Paper
Feeder Pickup Clutch.')
2) Remove the screw [1], and detach the
grounding plate [2].
[1]
Figure 3-8-8
Caution: When mounting, be sure that the
ground plate [2] is as indicated.
[2]
Figure 3-8-9
3 - 36
3) Remove the 2 springs [3].
[2]
Caution: When mounting, hold down the
[2]
[3]
Figure 3-8-10
pickup roller slave assembly [4] so
that the spring [3] is as shown;
then, fit the spring [3] with the
boss [5].
[3]
[4]
[5]
Figure 3-8-11
[3]