Canon LBP-2000 Service Manual page 138

CHAPTER 3
3. Removing the fixing assembly
1) Remove the upper cover. (See I-A-1 of this
chapter.)
2) Open the fixing upper cover.
3) Remove the claw [1], and remove the gear
[2].
[1]
Figure 3-7-2
4) Pull the fixing upper cover [3] to the front;
then, slide it to the right to detach.
Figure 3-7-3
3 - 28
[2]
[3]
5) Disconnect the 2 connectors [4], and free
the harness from the harness guide.
[4]
Figure 3-7-4
6) Disconnect the connector [5].
[5]
Figure 3-7-5
[4]