Canon LBP-2000 Service Manual page 158

CHAPTER 4
The Configuration Page shown here is for a printer with the optional print server, hard disk, PS
module, Flash ROM, and additional RAM memory installed.
[1] TEST MENU
Displays the test menu options.
[2] PCL MENU
Show the PCL print job settings, as determined by the PCL MENU options.
[3] PS MENU(Only displayed if the optional Adobe PostScript 3 Modeule A-65 is installed)
Displays the PostScript print job settings, as determined by the PS MENU options.
[4] FEEDER MENU
Displays the settings for the paper feed options for the printer, as determined by the FEEDER
MENU options.
[5] CONFIG MENU
Displays the printer configuration as determined by the CONFIG MENU options.
[6] SHUTDOWN MENU
Displays the menu option used to shutdown the printer, before turning it off.
[7] PARALLEL MENU
Displays the parallel interface settings, as determined by the PARALLEL MENU options. If the
optional PostScript module is installed, you will see the settings for automatic personality switch-
ing on the parallel port.
[8] USB MENU
Displays the USB interface settings, as determined by the USB MENU options. If the optional
PostScript module is installed, you will see the settings for automatic personality switching on the
USB port.
[9] ETHERNET MENU(Only displayed if the optional print server is installed.)
Displays the Ethernet interface settings, as determined by the ETHERNET MENU options. If the
optional Post Script module is installed, you will see the settings for automatic personality switch-
ing on the print server.
[10] LANGUAGE MENU
Displays the language setting.
[11] RESET MENU
Displays the reset menu options.
[12] JOB LOG MENU
Displays the job log settings, as determined by the JOB LOG MENU options.
[13] JOB CONTROL MENU
Displays the job control settings, as determined by the JOB CONTROL MENU options.
[14] INSTALLED OPTIONS
Displays a list of the options installed on the printer and the total memory.
4 - 8