Canon LBP-2000 Service Manual page 143

6) After mounting the fixing roller and the
fixing heater, push the fixing aluminum
core [8] with your finger lightly so as to
make sure that the thermal switch [9]
returns to its initial position by the
spring.
[8]
[9]
Figure 3-7-21
7) Check to make sure that the static re-
moving brush [10] is in contact with the
fixing roller core [11].
[11]
Figure 3-7-22
8) After making the check, mount the fix-
[10]
ing assembly to the machine using the
steps used to remove it but in reverse.
CHAPTER 3
3 - 33