Relocating The Printer - Canon LBP-2000 Service Manual

VI. RELOCATING THE PRINTER
If the Printer must be relocated after installation by truck or other means of transportation, take
note of the following:
1. Moving the printer with the cartridge removed
Once the cartridge is removed, the transfer charging roller can become displaced. Secure the
transfer charging roller in place using tape as follows before starting to move the Printer:
• If shipping tape is used, be sure to attach it so that the tape protection is over the gears and
the bushings, thus protecting the gears and the bushings of the transfer charging roller from
adhesive.
• If common tape is to be used, be sure to put a protective material (e.g., lint-free paper) between
the tape and the gears/bushings, thus protecting the gears and the bushings of the transfer
charging roller form adhesive.
Note: If the adhesive of the tape came into contact with a gear or a bushing, be sure to clean it
before using it.
Tape
Figure 1-6-1
CHAPTER 1
1 - 21