Canon LBP-2000 Service Manual page 187

Table 4-7-2 shows the DIP switch settings.
Switch
Switch 1
Switch 2
Switch 3
Switch 4
Note: The settings of switches 3 and 4 are enabled only when switch 2 is OFF.
Table 4-7-2
Description
ON : set all settings stored on the print server to
factory settings.
OFF : use settings stored on the print server to start up.
ON : identify the following automatically at time of print server
start-up: 10Base-T/100Base-TX, full-duplex/half-duplex.
OFF : use settings of switches 3 and 4 to start up.
ON : start-up100Base- TX
OFF : start-up10Base- T
ON : start up for full-duplex.
OFF : start up for half-duplex.
CHAPTER 4
Factory setting
OFF
ON
OFF
OFF
4 - 37