Canon LBP-2000 Service Manual page 128

CHAPTER 3
5) Mount the new cassette separation pad
[3] and the spring [4] at the same time.
[3]
[4]
Figure 3-4-5
3. Removing the paper size setecting
switch
1) Remove the printer top unit. (See II-C-1
'Removing the DC Controller PCB.')
2) Remove the 2 claws [1], and detach the
left cassette rail assembly [2] from the
bottom frame.
Figure 3-4-6
3 - 18
3) Disconnect the 3 connectors [3], and free
the harness form the harness guide.
4) Remove the 2 screws [4].
Figure 3-4-7
5) Remove the 2 claws [5], and detach the
paper size detecting switch [7] together
with the grounding plate [6].
[5]
[7]
Figure 3-4-8
[5]
[6]