Christie DHD600-G User Manual page 49

Section 4: Operation
NOTE:
™
PIP/PBP layout and size table as described below.
™
P : indicates primary source region (lighter color).
™
* : Both source regions are the same size.
PIP/PBP Layout
PBP, Bigger Left
Over-Under, Bigger Upper
PBP, Bigger Right
Over-Under, Bigger Lower
PIP-Bottom Right
PIP-Bottom Left
PIP-Top Left
PIP-Top Right
Timing Detection
Select timing detection mode to wide or normal. It is used to support additional
PC timings. When the projected picture is not completed, this function is used
to adjust the picture. "Normal mode" can support all of the 4:3 input sources.
"Wide mode" can support all of the 16:9 input source & most of the 4:3 input
source. For those 4:3 input sources not recognized by "Wide mode" (example
1400 x 1050), perform Auto Image using "normal mode".
Source Info
Display current source settings (read-only).
Enable Source Hot-Key
Toggle the check box to enable or disable the main source hot-key.
Source Hot-Key
Allows you to assign a different source to the hot-key. Highlight an input and
press ENTER to choose a different one.
4-20
PIP/PBP Size
Small Medium
P P
P
P
P P
P
P
P P
P P
P P
P P
Large
P
*
P
*
P *
*
P
P
P
P
P
G Series User Manual
020-000648-01 Rev. 3 (02-2014)