Christie DHD600-G User Manual page 74

Problem
y
Image is out of
focus
y
The image is
stretched when
displaying 16:9
DVD title
y
Image is too small
or too large
y
Lamp burns out or
makes a popping
sound
G Series User Manual
020-000648-01 Rev. 3 (02-2014)
-
Make sure both lens caps (front and back) are removed.
-
Adjust lens focus to fit.
-
Make sure the projection screen is between the required
distance.
-
When you play anamorphic DVD or 16:9 DVD, the
projector will show the best image when the projector
display mode is set to 16:9 in the OSD.
-
If you play 4:3 format DVD titles, please change the format
to 4:3 in the projector OSD.
-
If the image is still stretched, you will also need to adjust
the aspect ratio by setting the display format as 16:9 (wide)
aspect ratio type on your DVD player.
-
Adjust lens zoom to fit.
-
If it does not fill the screen properly, verify that the correct
lens is in use or change the position of the projector.
-
If the lamp burns out, try power cycling the projector. If
the lamp doesn't fire or if you hear it make a loud pop, the
projector will not turn on until the lamp module has been
replaced.
Section 5: Troubleshooting
Solution
5-3