Christie DHD600-G User Manual page 54

y
Restart Network
Execute a Network restart. This will not change any of the network
settings.
y
Network Factory Reset
Execute a network factory reset. Network settings will be reset to
the following default values:
- Projector Name = Christie@ + Serial Number
- Show Network Messages = ON
- LAN Settings:
- Manual
- IP Address = 192.168.0.100
- Subnet Mask = 255.255.255.0
- Default Gateway = 192.168.0.100
- WLAN Settings:
- Enabled
- Start IP = 192.168.1.100
- End IP = 192.168.1.120
- Subnet Mask = 255.255.255.0
- Default Gateway = 192.168.1.100
- SNMP Settings:
- SNMP Read Communication = private
- Trap IP Address = 0.0.0.0
- SMTP IP Address = 0.0.0.0
- All other settings are cleared/blanked
- Trap Configuration:
- All items = SNMP Trap + Email
y
LAN Setting Panel
- Select if the projector must obtain an automatically assigned IP address
through DHCP or if the user will set the address manually.
- Enter the IP address, netmask, default gateway and DNS server
address for the TCP/IP setting.
y
WLAN Setting Panel
- Select if the wireless LAN of the projector is enabled or disabled.
G Series User Manual
020-000648-01 Rev. 3 (02-2014)
Section 4: Operation
4-25