Vlan Entry - D-Link DES-6500 Manual

DES-6500 Chassis-based Layer 3 Ethernet Switch Manual

VLAN Entry

In the Configuration folder, open the VLAN folder and click the VLAN Entry link to open the following window:
Figure 6- 34. Current 802.1Q Static VLANs Entries window
The 802.1Q Static VLANs menu lists all previously configured VLANs by VLAN ID and VLAN Name. To delete an
existing 802.1Q VLAN, click the corresponding button under the Delete heading.
To create a new 802.1Q VLAN, click the Add button in the 802.1Q Static VLANs menu. A new menu will appear, as
shown below, to configure the port settings and to assign a unique name and number to the new VLAN. See the table
below for a description of the parameters in the new menu.
Figure 6- 35. 802.1Q Static VLANs - Add
To return to the Current 802.1Q Static VLANs Entries window, click the Show All Static VLAN Entries link. To change
an existing 802.1Q VLAN entry, click the hyperlinked VLAN ID button of the corresponding entry to modify. A new
menu will appear to configure the port settings and to assign a unique name and number to the new VLAN. See the table
below for a description of the parameters in the new menu.
75