D-Link DES-6500 Manual page 209

To define a Login Method List, set the following parameters and click Apply:
Parameter
Method List Name
Method 1, 2, 3, 4
DES-6500 Chassis-based Layer 3 Ethernet Switch Manual
Figure 8- 18. Login Method List – Add window
Description
Enter a method list name defined by the user of up to 15 characters.
The user may add one, or a combination of up to four (4) of the following
authentication methods to this method list:
tacacs - Adding this parameter will require the user to be authenticated
•
using the TACACS protocol from a remote TACACS server.
xtacacs - Adding this parameter will require the user to be authenticated
•
using the XTACACS protocol from a remote XTACACS server.
tacacs+ - Adding this parameter will require the user to be authenticated
•
using the TACACS+ protocol from a remote TACACS+ server.
radius - Adding this parameter will require the user to be authenticated using
•
the RADIUS protocol from a remote RADIUS server.
server_group - Adding this parameter will require the user to be
•
authenticated using a user-defined server group previously configured on
the Switch.
local - Adding this parameter will require the user to be authenticated using
•
the local user account database on the Switch.
none - Adding this parameter will require no authentication to access the
•
Switch.
208