Device Status - D-Link DES-6500 Manual

Device Status

The Device Status window can be found in the Monitoring menu by clicking the Device Status link. This window shows
the status of the physical attributes of the Switch, including power sources and fans.
The following fields may be viewed in this window:
Parameter
Redundant Power
Supply
Status
Output Voltage
Fan1
Fan2
System FAN
DES-6500 Chassis-based Layer 3 Ethernet Switch Manual
Figure 9- 11. Device Status window
Description
Displays the RPS' that may be in use.
A read only field denoting the current status of the internal power supply. Powered will
suggest the mechanism is functioning correctly while Not Exist will show the
mechanism is not functioning correctly.
A read only field denoting the current status of the external power supply. Normal will
suggest the mechanism is functioning correctly while Fail will show the mechanism is
not functioning correctly.
A read only field denoting if the Switch's #1 fan is functioning properly.
A read only field denoting if the Switch's #2 fan is functioning properly.
A read only field describing the operating status of other system fans in use on the
Switch.
242