D-Link DES-6500 Manual page 181

The following fields can be set or viewed:
Parameter
Interface Name
IP Address
Hello Interval (1-
18724)
Join/Prune Interval (1-
18724)
State
Click Apply to implement changes made. Click
Table.
DES-6500 Chassis-based Layer 3 Ethernet Switch Manual
Figure 6- 148. PIM-DM Interface Settings - Edit window
Description
Allows the entry of the name of the IP interface for which PIM-DM is to be configured.
This must be a previously defined IP interface.
Displays the IP address for the IP interface named above.
This field allows an entry of between 1 and 18724 seconds and determines the
interval between sending Hello packets to other routers on the network. The default is
30 seconds.
This field allows an entry of between 1 and 18724 seconds. This interval also
determines the time interval the router uses to automatically remove prune
information from a branch of a multicast delivery tree and begin to flood multicast
messages to all branches of that delivery tree. These two actions are equivalent. The
default is 60 seconds.
This field can be toggled between Enabled and Disabled using the pull-down menu,
and is used to enable or disable PIM-DM for the IP interface. The default is Disabled.
Show All PIM-DM Interface Entries
180
to return to the PIM-DM Interface