D-Link DES-6500 Manual page 101

The page shown below is the IP Access Profile Configuration page.
The following parameters can be set, for IP:
Parameter
Profile ID (1-8)
Type
VLAN
Source IP Mask
DES-6500 Chassis-based Layer 3 Ethernet Switch Manual
Figure 6- 57. Access Profile Configuration (IP)
Description
Type in a unique identifier number for this profile set. This value can be set from 1 - 8.
Select profile based on Ethernet (MAC Address), IP address or Packet Content Mask.
This will change the menu according to the requirements for the type of profile.
Select Ethernet to instruct the Switch to examine the layer 2 part of each
•
packet header.
Select IP to instruct the Switch to examine the IP address in each frame's
•
header.
Select Packet Content Mask to specify a mask to hide the content of the
•
packet header.
Selecting this option instructs the Switch to examine the VLAN part of each packet
header and use this as the, or part of the criterion for forwarding.
Enter an IP address mask for the source IP address.
100