Parameter
Interface Name
Auth. Type
Auth. Data
Click Apply to implement changes made.
DES-6500 Chassis-based Layer 3 Ethernet Switch Manual
Description
The name of a previously created IP interface for which to configure the VRRP
authentication.
Specifies the type of authentication used. The Auth. Type must be consistent with all
routers participating within the VRRP group. The choices are:
None - Selecting this parameter indicates that VRRP protocol exchanges
•
will not be authenticated.
Simple - Selecting this parameter will require the user to set a simple
•
password in the Auth. Data field for comparing VRRP message packets
received by a router. If the two passwords are not exactly the same, the
packet will be dropped.
IP - Selecting this parameter will require the user to set a MD5 message
•
digest for authentication in comparing VRRP messages received by the
router. If the two values are inconsistent, the packet will be dropped.
This field is only valid if the user selects Simple or IP in the Auth.Type field.
Simple will require the user to enter an alphanumeric string of no more than
•
eight characters to identify VRRP packets received by a router.
IP will require the user to enter a MD5 message digest for authentication in
•
comparing VRRP messages received by the router.
This entry must be consistent with all routers participating in the same IP interface.
190