Mst Configuration Identification - D-Link DES-6500 Manual

MST Configuration Identification

The following screens in the MST Configuration Table window allow the user to configure a MSTI instance on the
Switch. These settings will uniquely identify a multiple spanning tree instance set on the Switch. The Switch initially
possesses one CIST or Common Internal Spanning Tree of which the user may modify the parameters for but cannot
change the MSTI ID for, and cannot be deleted. To view the MST Configuration Identification window, click Con-
figuration > Spanning Tree > MST Configuration Identification:
The window above contains the following information:
Parameter
Configuration Name
Revision Level
MSTI ID
VID List
To delete a previously set MSTI Instance ID, click the corresponding
Configuration Identification window. Clicking the Add button will reveal the following window to configure:
DES-6500 Chassis-based Layer 3 Ethernet Switch Manual
Figure 6- 18. MST Configuration Identification window
Description
A previously configured name set on the Switch to uniquely identify the MSTI (Multiple
Spanning Tree Instance). If a configuration name is not set, this field will show the
MAC address to the device running MSTP.
This value, along with the Configuration Name will identify the MSTP region con-
figured on the Switch.
This field shows the MSTI IDs currently set on the Switch. This field will always have
the CIST MSTI, which may be configured but not deleted. Clicking the hyperlinked
name will open a new window for configuring parameters associated with that
particular MSTI.
This field displays the VLAN IDs associated with the specific MSTI.
under the Delete heading in the MST
58