Removing A Storage Interface Card - IBM BladeCenter HS22V Installation And User Manual
Hide thumbs
Also See for BladeCenter HS22V:
- Product manual (28 pages) ,
- Supplementary manual (1 page) ,
- Supplementary manual (1 page)
Table of Contents
Advertisement
14. If you have other devices to install or remove, do so now; otherwise, go to
Removing a storage interface card
Use this information to remove a storage interface card from the blade server.
The storage interface card controls the SAS storage drives. The following
illustrations and installation instructions show how to remove a
ServeRAID-MR10ie CIOv storage interface card from the blade server. The
illustrations and removal instructions are similar for other CIOv storage interface
cards.
ServeRAID
controller
To remove a storage interface card, complete the following steps.
1. Before you begin, read "Safety" on page v and "Installation guidelines" on
2. If the blade server is installed in a BladeCenter unit, remove it (see "Removing
3. Remove the blade server cover (see "Removing the blade server cover" on page
4. If an optional expansion unit is installed, remove the expansion unit (see
44
BladeCenter HS22V Type 7871 and 1949: Installation and User's Guide
"Completing the installation" on page 49.
page 19.
the blade server from the BladeCenter unit" on page 21 for instructions).
22 for instructions).
"Removing an optional expansion unit" on page 24). The storage-interface-card
Cable "B"
Battery
Cable "B "
Advertisement
Table of Contents
