IBM BladeCenter HS22V Installation And User Manual page 18

To check for updates, complete the following steps.
Note: Changes are made periodically to the IBM Web site. Procedures for locating
firmware and documentation might change from what is described in this
document.
1. Go to http://www.ibm.com/systems/support/.
2. Under Product support, click BladeCenter.
3. Under Popular links, click Software and device drivers for firmware updates,
You can subscribe to information updates specific to your blade server at
http://www.ibm.com/support/mynotifications.
The model number and serial number are on the ID label that is behind the control
panel door on the front of the blade server, and on a label on the side of the blade
server that is visible when the blade server is not in the BladeCenter unit.
Note: The illustrations in this document might differ slightly from the hardware.
The blade server (HS22V Type 7871 and 1949) is shown in the following
illustration.
Release
levers
A set of blank labels for your blade server comes with the BladeCenter unit. When
you install the blade server in the BladeCenter unit, write identifying information
on a label and place the label on the BladeCenter unit bezel. See the
documentation for your BladeCenter unit for recommended label placement.
Important: Do not place the label on the blade server itself or in any way block
the ventilation holes on the blade server.
2
BladeCenter HS22V Type 7871 and 1949: Installation and User's Guide
or click Publications lookup for documentation updates.
Release
buttons