View Bmc System Event Log - Supermicro Supero X8DAH+-F User Manual

X8DAH+/X8DAH+-F/X8DAH+(-F)-LR User's Manual
TPM Enable/Disable Status
This item displays the status of TPM Enabled/Disabled state.
TPM Owner Status
This item displays the status of TPM Ownership.
IPMI Configuration
Intelligent Platform Management Interface (IPMI) is a set of common interfaces that
monitor and manage system health. Refer to Intel's website at www.intel.com.
IPMI Firmware Revision
This item displays the current IPMI firmware revision.
Status of BMC
Baseboard Management Controller (BMC) manages the interface between the sys-
tem management software and platform hardware. This is an informational feature
which displays the status code of the BMC micro controller.

View BMC System Event Log


This feature displays the BMC System Event Log (SEL). It shows the total number
of BMC System Event entries. To view an event, select an Entry Number and press-
ing <Enter> to display the information as shown on the screen.
•
Total Number of Entries
•
SEL Entry Number
•
SEL Record ID
•
SEL Record Type
•
Generator ID
•
Event Message Format Ver
•
Event Sensor Type
•
Event Sensor Number
•
Event Dir Type
•
Event Data.
4-22