Call features
Answering a call in Normal mode
To answer a call in Normal mode, perform the following step:
v
Answering a second incoming call
When the handset is busy and a second call comes in, you will hear a
ticker tone and the display shows "waiting" and the number or name of
the calling party (call waiting display indication is applicable only to SIP
DECT).
To answer a second incoming call, perform the following step:
Press the * (for SIP DECT) or R (for Traditional DMC-based DECT) key.
The call will be answered in the same way (Loudspeaker on or off) as the
currently established call. By means of the * (SIP DECT) or R (DMC-
based DECT) key, you can toggle between
the two calls. It behaves in a similar way as having a call on hold.
Note: If you end one of the calls, the handset will go on hook and
then you will automatically get an incoming call from the other party.
Attention: Answering a second call is possible only if
Call Waiting feature is configured on your communication
system.
63
1. Press the
Call
OR
Press the
OK
key (Loudspeaker is off).
key (Loudspeaker is on).