Table of Contents
Advertisement
Enabling automatic DECT system selection
If you subscribe the handset to more than one DECT system, you can
configure your handset to automatically select the system to which it
connects.
If Automatic selection is enabled, when the handset moves out of range of
the current system, it automatically attempts to connect and log on to
another available (subscribed) DECT system.
To enable automatic selection of a DECT system, perform the following
steps:
Network select
Select
Auto. select
Select
1. Open the
Connectivity
"Accessing the Connectivity menu" (page
2. Press the
Up
select
option.
3. Press the
Select
4. Highlight
Auto.
5. Press the
Select
The name of the currently active system highlights.
6. Press the
Clr
idle display.
DECT system configuration
menu using the steps in
or
Down
key to highlight the
soft key.
select.
soft key.
key one or more times to return to the
48).
Network
52
Advertisement
Table of Contents
