Call features
Attention: If you reject or do not answer a call, or if the call is blocked
by Caller Filter (4070 and 4075 only), the message Number
of missed calls: N Show? appears on the display, where N
is the number of calls that have been blocked, missed, or
rejected.
Press the
soft key to close the dialogue. For more information, see
"Missed calls list" (page
Change settings during a call
During a call, you can adjust the headset or loudspeaker volume or mute
the handset.
This section describes the following tasks:
•
"Adjusting the headset or loudspeaker volume" (page 65)
•
"Using mute during a call" (page 66)
Adjusting the headset or loudspeaker volume
During a call, you can change the headset or loudspeaker volume using
the volume keys. A bar in the display increases or decreases to indicate
the volume setting. A beep sounds at the minimum or maximum volume.
To adjust the headset or loudspeaker volume, perform the following step:
When you adjust the headset or loudspeaker volume, the handset
remembers the new setting the next time you use the handset.
65
Yes
soft key to open the Missed or press the
1. Press the
Volume up
89).
or
Volume down
No
key.